Gemdale Gold reports 91% recovery in Finnish metallurgical tests as Pontio resource study approaches

Gemdale Gold has recovered 91% of gold from a composite sample at its Pontio project in Finland using conventional cyanide leaching, providing preliminary evidence that the mineralisation can be treated without a complex refractory processing route.

Leaching results

The Canada-listed explorer said on November 5 that testing undertaken by SLR Consulting in the United Kingdom recovered the gold within about eight hours at cyanide consumption of 0.6 kilograms per tonne. The composite sample was drawn from the company’s earlier 2026 drilling programme at Pontio, where an initial mineral resource estimate is targeted for early 2027.

Flotation potential

Alternative rougher flotation tests recovered up to 87.5% of copper and 70.5% of gold into a sulphide concentrate. Those results came from open-circuit tests and cannot be treated as final plant recoveries. The later stages of a commercial circuit can reduce the proportion of metal reporting to a saleable concentrate.

The tested feed material graded approximately 0.70 grams per tonne gold and 0.071% copper. The best preliminary cleaning result generated a concentrate grading 6.5% copper and 47.5 grams per tonne gold, suggesting that a combined gold-copper product might be technically possible.

Processing trade-offs

The two potential processing routes imply different business models. Direct leaching would focus on gold recovery, while flotation might add copper revenue but require concentrate marketing, transport and smelter terms. The company has not selected a final processing flowsheet or established the economic advantage of either option.

Further testing and economics

Further testing will include locked-cycle flotation work, additional leaching of flotation tailings and studies of pyrrhotite separation. The laboratory measured a Bond work index of 18.16 kilowatt-hours per tonne, indicating that grinding energy is likely to be a relevant factor in future processing economics.

The metallurgy reduces one area of technical uncertainty ahead of a resource estimate, but it does not establish reserves or project profitability. Gemdale still needs to demonstrate the scale of its deposit, verify recoveries across representative ore types and quantify capital and operating costs before determining whether Pontio can support a commercial operation.

The post Gemdale Gold reports 91% recovery in Finnish metallurgical tests as Pontio resource study approaches appeared first on Mining South East Europe.