BHP completes underground materials handling system at Prominent Hill expansion

BHP’s Prominent Hill Expansion Project (PHOX) is an upgrade to the existing Prominent Hill copper-gold mine deposit, part of its Copper South Australia Portfolio located approximately 130 km southeast of Coober Pedy and 150 km northwest of Roxby Downs in South Australia.

Last week BHP announced the practical completion of the PHOX Underground Crushing and Materials Handling System, which will help move ore from deep underground to the surface and support future production at a rate of 6.5 Mt/y, an increase from the existing 4.5 Mt/y. PHOX established the 1,331 m deep Wira shaft for ore transport to the surface in lieu of the existing truck haulage. By replacing deep truck haulage with an electric vertical hoisting system, the US$0.9 billion upgrade unlocks deeper ore reserves and extends the mine’s operational life to at least 2040.

The project included underground truck loading chutes, underground primary crushing station, skip loading station, production hoisting system and surface materials handling infrastructure. Above ground, additional works include the construction of civil, structural, mechanical, piping, electrical, and instrumentation infrastructure associated with the winder and surface stockpiles.

AECOM was engaged to deliver the pre-feasibility study, feasibility study and detailed design. M2P, based in Spring Hill, Queensland, brought together its workshop fabrication and underground construction capabilities to deliver critical infrastructure across the project. Its works encompassed the underground materials handling system, including crushing, loading, truck loading and grizzly stations, alongside the 700 m skyshaft construction and installation, and installation and commissioning of the hoisting system’s initial rope-up.

Demonstrating its capacity for large-scale specialist fabrication, M2P produced concrete formwork, installation steel and steel liners for one of the Southern Hemisphere’s largest crushed ore bins, including 585 Bisalloy 500 liner mats and a 53 t steel lowering frame.

M2P also supplied, fabricated, surface-protected and delivered 175 t of structural steel for the apron feeder support, with fabrication, blasting and painting completed at its Orange workshop. Together, it says these works showcase M2P’s ability to coordinate complex fabrication, protective treatments and site construction across major underground mining developments.

PYBAR’s Raise Bore Division delivered a series of ventilation raises and inclined ore passes to facilitate safe and efficient ore flow throughout the mine’s Malu orebody to the newly constructed Wira shaft.

Construction Sciences was engaged by RKF Engineering Services (RKF ES) to deliver materials testing services to support this development. Its NATA accredited concrete testing services were delivered in a BHP owned laboratory supported by RKF Engineering Services’ specialised technical equipment essential to the safe and quality compliant delivery of the infrastructure throughout the project.

RKF ES and other contracting partners Byrnecut, pitt&sherry and concrete producers Jetcrete and Hallet, played a critical role in delivering the design and shaft construction phase of the project. Byrnecut successfully introduced the Herrenknecht VSM shaft sinking system to Australia at Prominent Hill. This mechanised, non-entry system excavated the shaft pre-sink to a depth of 93 m. Following the pre-sink, a pilot hole was constructed from surface to mid-shaft, then another from mid-shaft to shaft bottom. The full 7.5m diameter shaft was constructed using strip and line methodology.

The post BHP completes underground materials handling system at Prominent Hill expansion appeared first on International Mining.